DJI Matrice M600 Hexacopter - Carolina Dronz

DJI Matrice M600 Hexacopter

$ 4,689.00

The Matrice 600 (M600) is a hexacopter from DJI designed for professional video and industrial imaging applications. It is centered around DJI's advanced A3 flight control system and incorporates the Lightbridge 2 system for HD resolution, low-latency monitoring via SDI, HDMI, and USB outputs on the controller. For camera support, the M600 works with Zenmuse Z15 series gimbals, the Ronin-MX gimbal, and Zenmuse X Series gimbal/camera hybrids.


The M600 comes almost-ready-to-fly (ATF), including controller (transmitter), flight batteries, charger, flight controller, and sundries. Additional hardware needed may include a gimbal, camera, as well as any flight controller add-ons. Some assembly is required.


Intelligent Drive System

The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely, and efficiently, while the A3 flight controller's self-adaptive systems adjust flight parameters automatically based on different payloads

Air System Design

Modular Design

The modular design makes the Matrice 600 easy to set up and ready to use

Gimbal Compatibility

All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 13.2 lb allows it to fly the Ronin-MX gimbal and a range of cameras, from Micro Four Thirds systems to the RED EPIC

Built to Last

A dust-proof propulsion system simplifies maintenance, while actively cooled motors make for reliable operation for extended periods of time

A3 Flight Controller

GNSS-based A3 acts as the brains of the aircraft. Using data from the GPS, compass, and various sensors, it provides navigation a stabilization with varying degrees of autopilot redundancy, depending on user settings. An array of expansion ports allows you to connect optional DJI and third-party equipment

DJI GO App for iOS and Android

The M600 supports the DJI GO app as well as the DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator

Extended Range

The Matrice 600's radio range extents to 3.1 miles with a clean signal

A3 Pro Upgrade

The separately available A3 Pro upgrade brings triple redundancy to the Matrice 600's flight controller. It features diagnostic algorithms that compare sensor data from the three sets of units in real-time, helping ensure the aircraft flies as expected, especially important in professional filmmaking and industrial environments

D-RTK GNSS Upgrade

The A3 GNSS system can be upgraded with separately available Real-Time Kinematic technology (RTK) for even greater navigational accuracy. Using dual antennas, RTK provides greater precision than a compass and is not susceptible to magnetic interference from metal structures

Lightbridge 2

Professional HD Transmission

DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI, and 3G-SDI ports on the controller support video output at up to 1080p/60 fps or a broadcast standard output of 720p/59.94 fps and 1080i/50 fps


The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices, including the Guidance sensor system, the RTK GNSS units, or third party components of your choice


In the Box
DJI Matrice 600 Hexacopter
  • Center Frame (Includes A3 and Lightbridge 2)
  • 6 x Frame Arm with Propeller Holder
  • 2 x Landing Gear Leg
  • Landing Skid
  • Left Retractable Module 
  • Right Retractable Module
  • 2 x Retractable Module Mounting Rod
  • 2 x Retractable Module Bracket
  • Radio Controller (Transmitter)
  • 6 x TB47S Flight Battery
  • 2 x Charging Hub
  • 2 x Spring
  • 2 x Battery Charger
  • AC Power Cable for Charger
  • Micro-USB Cable
  • GPS-Compass Pro
  • GSP Mount
  • 6 x Arm Stopper
  • Landing Gear Stopper
  • 6 x Knob with Gasket
  • Screws Set
  • Double Sided Tape Set
  • Tape
  • Battery Stickers